H3-R
| SIZE | Length:165±2mm； |
| Width: 85±2mm； | |
| Height:50±2mm; | |
| Weight | 550g( with attenna ) |
| Screen | capacitive touch screen and support multi-touch; |
| 6 Inch | |
| Detection &positioning | It has drone signal detection and recognition functions, and the device can support detect DJI, Harbson, Zhendi, Wi-Fi drone ,DIY drone (analog image transmission), etc.; |
| With positioning function, it can display the working frequency band, brand number, electronic fingerprint ID (serial number of the fuselage), bearing, distance, latitude and longitude , flight altitude and other information of the drone in the detection list, and it can display identification icons and flight tracks on the electronic map; | |
| With the remote control (pilot) detection and positioning function, the remote control can be displayed in the detection list. (Pilot) latitude and longitude , distance, bearings and other information, and can display identification icons and movement tracks on electronic maps. | |
| The device can detect DJI (including Royal 3, Royal 2, Royal Mini2, Royal Air, Royal Air2, Royal miniSE, Royal Pro, Royal Air2S, Royal mini, Phantom 4Pro, Phantom 4ProV2.0,Genie 4, Tello and other models), Daotong, Xiaomi, Dahua, Hikang, Shiji, Harbson, EHang, Haoxiang, Zerodu, Weili, Zhendi, Huakor, Sima, Cornerstone, Yunke, Chasing Cloud, Pudu, Holystone, AEE, Feipai, Youdi, Pegasus, Keweitai, Dagong, Corbett, UAV signals from JOUAV, Parrot, 3DR, CFLY, TW and other brands; | |
| Frequency Range | 25MHz～6000MHz |
| Main Frequency | 330MHz、433MHz、840MHz、910MHz、 1.2GHz、1.4GHz、2.4GHz、5.2GHz、5.8GHz |
| sensitivity | ≥ -95dBm（25kHz） |
| Detection range | 2km-3km |
| Detection Height | 0～3000m |
| Directional presicion | ≤1.0°（RMS）。 |
| Positioning accuracy | Positioning error for drones≤10m； |
| Positioning error for pilots ≤10m。 | |
| Detection time | ≤2s。 |
| Refresh time | ≤2s。 |
| Detection Success rate | ≥99%。 |
| Working time | Over 4 hours |
| The same drone intrusion detection | Within a certain period of time, when the device detects and identifies the same drone intrusion multiple times, it will be automatically fuse into a single piece of information; |
| For multiple intrusions of the same drone identified, the device will be automatically integrate the intrusion information of the drone, and the electronic fingerprint ID of the drone in multiple records should be the same. | |
| Multi-target recognition function | The number of drones that can be detected and identified at the same time should over 10qty |
| The types of UAV should be over 10 QTY | |
| There should be no less than 10 types of drone remote controls (non-DJI brands) that can be detected and identified at the same time. | |
| Multi-target positioning capabilities | With multi-target positioning, it can simultaneously detect and locate no less than 11 UAV targets. |
| Trajectory tracking | With the trajectory tracking functions, it can display the detected flight trajectory of each UAV and the movement trajectory of the remote controller (pilot) in different colors; |
| The number of drone trajectories that can be displayed at the same time over 11 qty | |
| The number of remote control (pilot) trajectories that can be displayed at the same time over 5 qty | |
| Positioning capabilities | With positioning function, it can display the latitude and longitude information . |
| Power supply | Built-in lithium battery |
| Database Drone list |
The
number of drone brands contained in the feature library should be over 25QTY , and the number of models should be over100QTY. |
| power consumption | It
should be able to be charged through a mobile power supply (power bank) or a power adapter connected to the mains. |